Troubleshooting (Continued)
Symptom | Cause | Correction | ||
|
|
|
| |
Some channels are | Those channels were deleted with the | Use CH. ADD/DEL. to restore channels. | ||
skipped over when | CH. ADD/DEL option. | See “Channel Selection” on page 15. | ||
using CH/TRK (v/V) |
|
|
| |
|
|
|
| |
Picture and sound of | Antenna or cables are loose. | Tighten connections or replace cable. | ||
broadcasting channel |
|
|
| |
are weak or missing. |
|
|
| |
Wrong TUNING BAND option is being | Try all TUNING BAND options. See | |||
| ||||
| used. | “Channel Selection” on page 15 for | ||
|
| details. | ||
|
|
|
| |
Camcorder image is not | Camcorder is off. | Turn camcorder on and operate | ||
shown. |
| properly. | ||
|
|
|
| |
Camcorder image via | DVD+VCR SOURCE SELECT is not set | Press INPUT to select LINE input chan- | ||
A/V input to DVD+VCR | to LINE1 or LINE2. | nel (LINE1 or LINE2). | ||
is not shown on TV |
|
|
| |
screen. |
|
|
| |
Timer recording is not | Clock in DVD+VCR is not set to correct | Set clock to correct time. See “Setting | ||
possible. | time. | the Clock” on page 16. | ||
|
|
| ||
| Timer has been programmed | Reprogram Timer. See “Timer | ||
| incorrectly. | Recording” on pages 22 and 23. | ||
| indicator does not appear after pro- | Reprogram Timer. | ||
| gramming timer. |
|
| |
indicator appears | DVD+VCR is in Timer Recording mode. | This is the normal indication that the | ||
after DVD+VCR is turned |
| DVD+VCR is in TIMER mode. | ||
off. |
|
|
| |
Stereo Audio Record | TV is not | No action is possible. | ||
|
|
| ||
Broadcast program is not in stereo for- | No action is possible. | |||
and/or Playback is not | ||||
mat. |
|
| ||
present. |
|
| ||
|
|
| ||
DVD+VCR A/V Out jacks are not con- | Make A/V connections. Stereo is | |||
| ||||
| nected to TV A/V In jacks. | available only via A/V output from | ||
|
| DVD+VCR. | ||
|
|
| ||
| DVD+VCR Audio/Video Out is not | Select AUX or A/V source as TV input. | ||
| selected for viewing at the TV. |
|
| |
| DVD+VCR BROADCAST TYPE mode is | Set BROADCAST TYPE mode to | ||
| set to SAP or MONO. | STEREO. See “Setting the VCR Setup | ||
|
| Menu” on page 15. | ||
|
|
|
| |
Moisture Condensation
Moisture condensation can occur: | In locations where moisture condensation may occur: | ||
|
|
|
|
• | When the DVD+VCR is moved from a cold place to a | • | Keep the DVD+VCR plugged into an AC power outlet |
| warm place. |
| with POWER On. This will help prevent condensation. |
• | Under extremely humid conditions. | • | When condensation has occurred, wait a few hours |
|
|
| for the DVD+VCR to dry before using it. |
|
|
|
|
34
