SPECIFICATIONS

Scanning system : EIA standard (525 TV lines, 30 frames/sec.)

Interlace : PLL 2:1 interlace

Image device : 1/2 inch solid state image device CCD

Picture elements : 811 (H) x 508 (V)Effective picture elements : 768 (H) x 494 (V)

Synchronizing system : Internal sync/External sync (Automatic switching)

External sync: : VS (composite video signal), 1.0 Vp-p / 75 ohms (to switch from 75 ohms to Hi impedance, remove the internal jumper chip)

Resolution : 570 TV lines horizontally, 350 TV lines vertically Video output level : 1.0 Vp-p/75 ohms, composite

Video S/N ratio : More than 50 dB

Minimum required illumination : Approx. 0.07 lux with a F 1.2 lens, (incandescent lighting) approx. 0.09 lux with a F 1.4 lens

Backlight compensation : Manual ON/OFF switching, center zone light measuring system (Active when using an auto-iris lens)

Electronic shutter : 8 speeds, selectable by switches:

(1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.)

Electronic iris function : Manual ON/OFF switching Electronic iris range : 0.07 lux to 18,000 (F 1.2, lens)

0.09lux to 24,000 (F 1.4, lens)

0.36lux to 100,000 (F 2.8, lens)

Flange-back : 12.5 mm ± 0.8 mmGamma correction : γ = 0.45

Lens mount : CS mount (or C mount with the supplied adaptor) Environmental conditions : Temperature: –10˚C ~ +50˚C

Humidity: less than 90% (no condensation)

Power supply : 12 V DC ± 10 %

Power requirement : 12 V DC/150 mA (without auto iris lens)

Weight : Approx. 330 g (without lens)

Dimensions

 

108.5

56

 

1.5

99.5

 

 

 

 

 

 

VIDEO OUT

VS IN

POWER

 

45

 

SEE INSTRUCTION MANUAL

 

 

NC

+ 12V DC –

 

11

 

 

12

1/4”–20 UNC

28

 

22

 

 

 

Features and specifications are subject to change without prior notice or obligations.

English 13