PARTS NAMES

14 3

2

5

6

12 3 2

1

1 Shorter screws: M3 x 42Longer screws: M3 x 6

3Camera mounting screw hole: 1/4"-20

UNC
1 Video output connector (VIDEO OUT: BNC type)

Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.

2 12 V DC input terminal (12 V DC, GND)3External sync composite video signal input connector (VS IN: BNC type)

Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite signal of a video distributor.

4Power indicator (POWER)

Comes on when the power to the camera is on.

5Lens mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold separately).

6Camera installation bracket

The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the longer screws and install the shorter screws on the opposite side to seal the openings.

CAUTION:

When installing the camera support, select a location that can support the total weight of the camera and accessories.

4 English