PREPARATION

12 3 2

1

2A

B

Camera installation

A:Lens mount cap

Remove the lens mount cap before installing the lens (sold separately).

•Use with this camera a CS mount type auto-iris lens (for 1/3 inch).

Auto-iris lenses regulate the amount of light entering the camera according to the brightness of the subject.

•C mount auto-iris lenses can also be used with the supplied adaptor (see page 7).

B:Installation bracket

The bracket can be fitted at the top or bottom of the camera. To fix the bracket, make sure to use the screws that held the bracket before, and use the other two screws to seal the openings on the opposite side.

1Opening sealing screws (M3x4) (shorter)

2Bracket fixing screws (M3x6) (longer)

3Threaded hole for the support (1/4"–20 UNC)

•Mounting at the top (R1)

•Mounting at the bottom (R2)

R1R2

CAUTION:

•When installing the camera support, select a location that can support the total weight of the camera and accessories.

•This installation should be made by a qualified service person and should conform to all local codes.

English 5