PARTS NAMES

5Camera setup section6White balance adjustment volume (R or B)97 Line phase adjustment volume (PHASE)

 

8 Lens iris adjustment volume

 

9 Lens iris output connector (LENS)

8

This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type

 

7lens.

 

56

F Video output connector (VIDEO OUT: BNC type)

 

 

Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.

 

 

G 24 V AC or 12 V DC input terminal (AC24V, DC12V, GND)

 

 

H Power indicator (POWER)

 

 

Comes on when the power to the camera is on.

F

H

■ Power supply connections

 

 

 

 

Use a 3 wire grounded cable (22 AWG or more), and connect as shown by the illustration.

G

 

CAUTION:

 

 

 

 

• To prevent camera and/or AC adaptor failure, pay close attention to polarity when making

 

 

the connections.

 

 

• To prevent fire hazard any UL listed wire rated VW-1, should be used for the 24 V AC cable

 

 

input terminal.

4 English