About the “A Internet connection”

Port forwarding for the video port (HTTP/UDP) must be enabled on the broadband router. For details on how to set port forwarding, please refer to your router's Instruction manual.

bPort 1: JPEG/H.264 HTTP

Port number (default): 80 (TCP)

IP address (default): 192.168.0.2

Port number (default): 80 (TCP)

• Set to same value as on LAN

To LAN port

To WAN port

RouterbPort 2: H.264 UDP Unicast

Port number (default): 3939 (UDP)

IP address (default): 192.168.0.2

Port number (default): 3939 (UDP)

• Set to same value as on LAN

To LAN port

To WAN port

Router

To view H.264 video over the Internet, set port forwarding for UDP to enable communication using UDP protocol. However, it may not be possible depending on your network environment. Consult your network administrator.

MEMO:

If you install multiple cameras, for second and later cameras, specify different numbers for ports 1 and 2 than those for the first camera via the network.

•Port 1: [NETWORK] → "PORT NUMBER"

•Port 2: [CODEC/STREAMING] → "UDP (Unicast) PORT"

10