Setting up the network information of the camera
<Default Settings> |
|
| |
• DHCP | : OFF | • Network Speed |
|
• IP Address | : 192.168.0.2 | (bandwidth limitation) : NO LIMIT | |
• Subnet Mask | : 255.255.255.0 | • Port Number | : 80 |
|
| ||
• Gateway | : 192.168.0.1 |
|
|
If you wish to use the default settings, the settings below are not necessary.
1Select [NETWORK SET] with the jl buttons and press the SET button.
DHCP | OFF |
|
IP ADDRESS | SET | y |
SUBNETMASK | SET | y |
GATEWAY | SET | y |
NETWORK SPEED | NO LIMIT | |
PORT | 00080 |
|
DEFAULT | OFF |
|
[MENU]_(MAIN MENU) |
| |
2Select [DHCP] with the jlbuttons and press the SET button.
•
appears next to the selection "OFF" indicating that you can change the setting.
DHCP | OFF |
|
IP ADDRESS | SET | y |
SUBNETMASK | SET | y |
GATEWAY | SET | y |
Select "OFF" or "ON" with the jl
buttons and press the SET button. OFF: Manual setting (go to step 3) ON: Automatic setting (go to step 5)
3Select [IP ADDRESS] with the jl buttons and press the SET button.
IP ADDRESS IP ADDRESS
192.168.000.002 x
Select the input position with the dc buttons, select a value with the jl buttons, and press the SET button.
4Use the same procedure as in step 2 to set up [SUBNETMASK] and [GATEWAY].
5Select [NETWORK SPEED] with the jl buttons and press the SET button.
•
appears next to the selection "NO LIMIT" indicating that you can change the setting.
DHCP | OFF |
|
IP ADDRESS | SET | y |
SUBNETMASK | SET | y |
GATEWAY | SET | y |
NETWORK SPEED 
NO LIMIT
PORT00080
DEFAULT OFF [MENU]_(MAIN MENU)
Select the network speed (bandwidth limitation) with the jlbuttons and press the SET button.
NO LIMIT, 128, 256, 512 (Kbps), 1, 2, 3, 4, 5, 6 (Mbps)
6Select [PORT] with the jl buttons and press the SET button.
| PORT |
PORT | 00080 |
| x |
[MENU]_(NETWORK)
Select the input position with the dc buttons, select a value with the jl buttons, and press the SET button.
7Press the MENU button to exit the settings.
15