Sanyo manual x2.6, VDC-DPN9585P/VCC-PN9575P, Intelligent Backlight Compensation, PTZ Operations

Functions Specific to the

VDC-DPN9585P/VCC-PN9575P

Intelligent Backlight Compensation

The VDC-DPN9585P and VCC-PN9575P feature two selectable backlight compensation modes: multi-spot metering (applied to the whole screen) and center-zone metering (applied to the central portion only).

16 Preset Positioning and

Sequential Monitoring

Functions

Up to 16 preset positions (with different settings for pan, tilt and

zoom) can be registered for a single VDC-DPN9585P or VCC-

PN9575P. A simple key entry to

a controller allows you to easily switch to the scene you want to monitor. Auto-pan monitoring can be also be programmed by designating two end points on a horizontal plane.

PTZ Operations

Both the VDC-DPN9585P and VCC-PN9575P come with a PT mechanism and allow panning of 335 degrees (110 degrees*) and tilting of 90 degrees (90 degrees*) to reduce blind spots in the surveillance area. When particular angles are preset on the camera (up to sixteen points), it moves to each position quick- ly at the speed of 120 deg/sec. max. for both panning and tilt- ing. Combining these features with the motion detector, it is possible to catch all actions taking place in the area.

*For wall-mounted cameras Photos of VDC-DPN9585P

Ceilling mounting		Wall mounting
Panning	0 to 335°	Panning	–55 to 55°
Tilting	0 to 90°	Tilting	0 to –90°

Adjustment via VAC-70 Control Unit (Sold Separately)

Connection of the VAC-70 control unit allows adjustment of pan/tilt, angle of view, motion detector, backlight compensa- tion and other functions from in front of a monitor. The lens

angle can be adjusted directly via a control switch inside the camera housing.

Video coaxial cable

VDC-DPN9585P

Control switch
inside camera	VAC-70	Monitor

Multi-spot metering measures luminous intensity in 64 areas on screen to enable optimal backlight compensation even for peripheral and moving objects.

Flexible Motion Detection

Sensing is performed by splitting the field of view into 16 areas. Movement and brightness levels within the picture are analyzed to accurately detect surveillance targets. Upon detec- tion, the camera sends an alarm status signal and captures the object at zoom magnifications of up to x2.6. Fine adjustments of settings such as sensitivity, tracking time, zoom ratio and areas not requiring detection can also be made.

x2.6

Areas with swaying trees or flickering light, etc. can be eliminated to avoid false alarms. Surveillance of the detected object can be conducted at a zoom magnification of x1.0, x1.4, x2.0 or x2.6.

Privacy Masking (Up to 8

Masks)

When there is a house or even an object as small as a window within the camera frame, it is possible to mask the area so that it will not appear on the monitor screen to protect other’s privacy.

Up to 8 rectangular masks of arbitrary size can be set. These masking areas may be protected with a 4-digit (max.) password.

520 TV Line Resolution (Analog Video Signal)

Featuring SANYO’s DSP circuitry and a high performance 1/4- inch CCD for horizontal resolution of more than 520 TV lines and superior color reproduction. Sharp, crisp images are delivered for greater precision in surveillance under a varied range of conditions.

Built-in Electronic Shutter

A high-speed electronic shutter that is internally switchable for eight modes using a DIP switch allows adjustment increments from 1/50 to 1/10,000 sec.

Operation on PoE, AC or DC Power Sources

The VDC-DPN9585P and VCC-PN9575P can operate on PoE, 12 V DC (12–15V DC) or 24 V AC (50 Hz, and even at a toler- ance of ± 10%). Switching to the correct mode occurs auto- matically when power is supplied.