Sanyo VDC-HD3500P Lens Adjustment, ■Adjusting focus, “ERROR”, “FOCUSING”, “FOCUSING”, 2Press the SET button, •VDC-HD3500P/HD3500/HD3300P/HD3300:

Lens Adjustment

■Adjusting focus

NEAR

FAR

SET

132

1Roughly focus the subject using NEAR/FAR buttons. Make adjustment while watching the monitor.

2Press the SET button.

The camera automatically focuses on the subject. Note that the color of the status indicator A “FOCUSING” turns from black to orange.

The status indicator A changes to “ERROR” when the subject cannot

automatically come into focus.

In this case, manually adjust the focus. ( Electronic manual)

3Press the NEAR/FAR button to adjust the focus.

Make adjustment so that the FA bar gauge B indicates the highest level. When the subject comes into focus, the color of the status indicator A “FOCUSING” changes from black to orange.

Pressing the buttons moves the FB bar gauge C.

The position changes step by step each time the button is pressed and continuously at a high speed when the button is held down.

4Press the SET button for 2 seconds or more. The focus adjustment screen will close.

•The focus adjustment screen will also close automatically if left idle for 5 minutes or more.

•VDC-HD3500P/HD3500/HD3300P/HD3300:

If video is out of focus in either color or black-and-white mode, adjust the focus in respective modes.

4