SC4HW/NA
PROGRAM TIMER RECORDING
Using Timer Recording for Several Programs
If two or more programmed recording times overlap on the same day, the VCR will not begin recording a new program until the previous program has ended (as shown below).
Program Recording Order
| 7:00PM |
| 8:00PM |
| 9:00PM | 10:00PM | ||
Program
These portions will not be recorded
TIMER SETTING NOTES:
œIf the programmed recording falls on a Saturday or a Sunday, the Daily recording mode will not be possible.
œTo select the A/V recording mode, press the INPUT button instead of selecting a channel number.
œTimer recording is not possible through the front AUDIO/VIDEO input jacks.
œ12:00 PM = noon; 12:00 AM = midnight.
œIf the end of the tape is reached during timer recording, the VCR stops and the power turns off automatically.
œIf the power fails or the VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 5 seconds.
After 5 seconds, the clock and program timer must be reset when power is restored. Refer to INITIAL SETUP to set the VCR.
œIf a program timer is set and a tape is not loaded into the VCR, the TIMER indicator will flash.
33
