LOCATIONS OF CONTROLS AND INDICAT ORS
Front Panel
Reference pages are shown in square brackets.
1Cassette loading slot
2STOP/EJECT button [3, 21]
3FF (fast forward) button [29]
This button is used both for fast forward and
forward picture search.
4PLAY button [21]
5REW (rewind) button [29]
This button is used both for rewind and reverse
picture search.
6TIMER • RF4 indicator
7VCR indicator
8Remote control sensor
9REC (recording) • RF3 indicator
FPOWER indicator
GPAUSE/STILL button [23, 29]
œPress this button in the record mode to
temporarily stop a recording (PAUSE).
œPress this button in the playback mode to view a
still frame (STILL).
œPress this button repeatedly in the still mode to
advance the picture one frame at a time.
HREC (record) button [23, 34]
ICHANNEL selection buttons (l and j) [13, 22, 34]
JPOWER button
KFront-panel AUDIO/VIDEO input jacks [23, 36]
Connect the audio and video outputs from an
external unit (i.e. a video camera, second VCR) to
these jacks. To record the signals coming from the
external unit, press the INPUT button on the
remote control to display “L2” instead of a channel
number (see page 23). If only one audio jack is to
be used, connect it to the L (left) jack.
Auto A/V Selection [16]
There is no need to unplug the VCR from the TV to
view another video source on-screen. When the
VCR power is off and the output cable from an
external unit is connected to these front A/V input
jacks, the signal from the external unit is
automatically sent to the connected TV screen.

1

STOP
EJECT
POWER
CHANNEL
REC
PAUSE
STILL POWER
REC (RF3)
VCR
TIMER (RF4)
PLAY c
FF ef REW
VIDEO L-AUDIO-R
AV INPUT

34256789FGHIJK

SC4HW/NA (VHR-H530 GB) Fri. Jan., 07/2000
4