QUICK SHOT SETTING

(STILL IMAGE SHOOTING MODE ONLY)

With the initial settings, when the shutter release button is pressed, the digital camera performs the exposure correction, the white balance settings, the focussing, and other settings before the image is captured. This results in a delay after the shutter release button is pressed before the image is actually captured. By turning on the quick shot setting, these settings are set less precisely, but the delay after the shutter release button is pressed until the image is actually captured is drastically reduced.

1 Display the Still Image Shooting Setting Screen (see page 39).

2 Select a quick shot setting from the quick shot menu.

ä: Turns off the quick shot setting.

R: Turns on the quick shot setting.

3 Press the SET button.

œThis completes the quick shot setting.

B

12

QUICK SHOT

OFF

HINT

How to use the quick shot

1Select Rto turn on the quick shot setting.

2Press the shutter release button, and when the camera is ready to shoot, press it again.

œThe first time the shutter release button is pressed, the digital camera performs the normal settings; the second time it is pressed, quick shot shooting is enabled. If the shutter release button is subsequently pressed within 1 second, consecutive quick shots are possible. After an interval of one second or more, however, the camera returns to normal shooting.

121English