4. Close and lock the battery/memory card compartment.

Inserting an SD/SDHC Memory Card

Expand your camera’s storage by using SD or SDHC memory cards.

1.Unlock and open the Battery/memory card compartment at the bottom of the camera.

2.Insert the SD/SDHC card into the memory card slot with the metallic part facing the back side of the camera.

3.Push the SD/SDHC card into the memory slot until it clicks into place.

4.Close and lock the Battery/memory card compartment.

To remove the SD/SDHC card

1.Unlock and open the battery/memory card compartment.

2.Gently push the card until it pops out.

3.Pull out the card carefully.

The battery may feel warm after it has been charged or immediately after being used. This is normal and not a malfunction.

When using the camera in cold areas, keep the camera and battery warm by holding them inside your outer clothes.

14



Page 15
Image 15
Sanyo VPC-E1414 instruction manual Inserting an SD/SDHC Memory Card, To remove the SD/SDHC card