Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
1.Press Menu button to launch the Record/Playback Menu.
2.Use the or keys to switch the menu tab to Setup menu.
3.Use the or keys to move through the menu selections.
4.To select an item, press the OK button or key.
5.Change the submenu settings using the
6.Press the OK button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
1.From the Setup menu, select Sounds.
2.Adjusts sound settings.
3.Press the OK button to apply changes.
| Item |
|
| Available Settings |
|
| Description |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| Startup |
|
| Sound 1, Sound 2, |
|
| Selects the startup sound when camera is turned on. |
|
|
|
| Sound 3, Off |
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Shutter |
|
|
|
|
| Enables or disables shutter sound when Shutter button is |
|
|
| On, Off |
|
| pressed. Shutter sound is not available when recording videos |
| ||
|
|
|
|
|
|
| or voice clips. |
|
| Beep |
|
|
|
| Adjusts volume. |
| |
| volume |
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Setting Power Save
The Power Save function allows you to set an idle time after which the camera automatically sets to sleep mode to save power. After a minute of being in sleep mode, the camera eventually turns off power.
This function is not available in the following instances:
•Recording a video or audio file
•Playing a slideshow/video/audio file
•Using the USB connector
57