Using Flash

When taking pictures in difficult lighting conditions, use the Flash/Right button to get correct exposure. This function cannot be activated in recording videos or continuous shooting.

To activate Flash:

Press the Flash/Right button on your camera

 

 

 

repeatedly until your desired flash mode is displayed

 

Flash/Right

 

on the LCD monitor.

 

button

Your camera is equipped with five flash modes:

Auto flash is enabled

AUTO. The flash fires automatically whenever extra

 

lighting is needed.

 

Red-eye reduction. The flash fires twice to reduce the

 

red-eye effect.

 

Forced on. The flash fires whenever you press the

 

Shutter button regardless of lighting conditions.

 

Slow sync. The flash fires with a slow shutter speed.

 

Forced off. The flash is turned off.

 

Flash function is only available in shooting still images but not available in Burst and AEB modes.

Do not charge the flash while pressing the zoom button. Charge the flash after releasing the zoom button if necessary.

Setting the Focus Mode

This function allows users to define the type focus when recording a still image or a video clip.

To set the Focus mode

Press the Macro/Left button repeatedly until the desired focus mode icon is displayed on the lower left corner of the LCD monitor.

Macro/Left button

Your camera supports the four focus modes:

Normal. With normal focus, the focus range starts from 0.12m. When the camera is set to Normal mode, there is no icon displayed on the screen.

Macro. This mode is designed for close-up photography. If Macro is enabled, you can capture the detail and sharpness of a very close image by fixed focus.

Pan Focus. The focus of this mode is in the maximum Depth of Field (DOF), not designing for close-up photography.

Infinity. When Infinity is set, the camera focuses on distant objects.

23



Macro enabled

Page 24
Image 24
Sanyo VPC-E1414 instruction manual Using Flash, Setting the Focus Mode, To activate Flash, To set the Focus mode