USING THE ZOOM

Your camera has two zoom functions: optical zoom and digital zoom. You can specify whether or not the digital zoom is enabled, and whether or not the optical zoom during video clip recording is enabled (page 123).

1 Point the camera lens at the subject.2 Press [T] or [W] on the zoom switch to compose the desired image.

[T]: Zoom in on the subject.

[W]: Zoom out.

hWhen the zoom switch is pressed, the zoom bar appears on the LCD monitor.

hWhen the optical zoom factor is at maximum, zooming stops temporarily. When [T] on the zoom switch is pressed again, the mode changes to the digital zoom mode and zooming continues.

3 Take the picture.

Zoom switch

LCD monitor

Zoom bar

Pointer

When both optical and digital zoom are enabled

Optical zoom

Digital zoom (yellow)

When optical zoom only is enabled

CAUTION

i If the optical zoom is used during video clip recording, the noise from the movement of the lens may be audible in the recording.

English 42