Sanyo VPC-MZ3GX Where is the image and audio data saved?, Taking pictures in backlight conditions

Where is the image and audio data saved?

œAll the image and sound data is recorded on the card installed in the camera (see page 164).

Taking pictures in backlight conditions...

œWhen taking pictures with the light coming from behind the subject, due to the characteristics of the lens, light lines or patterns (flare phenomenon) may appear in the captured image. In this situation, it is recommended that you avoid taking pictures with the subject lit from behind.

NOTE

The field of view differs depending on the shooting mode

œEven at the same camera angle, at a resolution of Din the still image and sequential shots shooting modes, and at a resolution of Ein the

video clip and sequential shots shooting modes, the field of view differs slightly (at a resolution of Ein the video clip and sequential shots shooting modes, the field of view appears slightly zoomed in).

About sequential shots shooting

œIn sequential shots shooting, the autofocus function is activated when the shutter release button is pressed and remains fixed at the same focus until the sequential shots are finished.

If the motion alert icon appears...

œDuring still image shooting, if the shutter speed is slow and the possibility

that the image may be blurred due to camera movement becomes high, the motion alert icon Tmay appear on the LCD monitor. In this case, use a

tripod to stabilize the camera when shooting, set the exposure control (see page 110) to Ï, or set the flash operation mode to automatic (see page 73).

Motion alert icon

12

M

8.0

1S

English 58