Sanyo VPC-MZ3EX, VPC-MZ3GX instruction manual Adding a Voice Memo, Off

ADDING A VOICE MEMO

In the still image shooting mode, you can record approximately 4 seconds of sound (called a “voice memo”) when capturing the image.

1 Display the Still Image Shooting Setting Screen (see page 39).

2 Select the add voice memo icon

afrom the voice memo menu, and press the SET button. b: For no voice memo.

a: For adding a voice memo.

3 Press the shutter release button to capture the image, and then talk into the microphone.

œAbout 4 seconds of sound are recorded.

œDuring recording, Kappears in the upper right area of the LCD monitor.

œAfter recording has finished, the add voice memo setting reverts off.

B 23

VOICE MEMO

OFF

Shutter release button

Microphone

HINT

œWhen the compression rate is set to L, it takes approximately 10 seconds for the image data to be recorded (when using a CompactFlash card), after which voice memo recording will start.

œEach voice memo uses one-half the memory of an image captured at 4 resolution and Gcompression rate.

œThe voice memo can be played back in the still image playback mode (see pages 85, 87).

English 104