TROUBLESHOOTING
| Problem | Cause & Solution | P. |
| The power does | The batteries are consumed. |
|
| not turn on. | ⇒Replace with new batteries. |
|
|
| The batteries are not inserted correctly. |
|
|
| ⇒Reinsert the batteries, making sure the polarity | 15 |
|
| (+ and | |
|
|
| |
|
| The battery compartment cover is not fully closed. |
|
|
| ⇒Close the battery compartment cover |
|
Power |
| completely. |
|
| Due to cold temperatures, the batteries |
| |
|
|
| |
|
| temporarily lost their power. | 69 |
|
| ⇒Place the batteries in your pocket, for example, | |
|
|
| |
|
| to warm them up before using them. |
|
| The power | The AC adapter (sold separately; |
|
| saving function |
| |
| does not | ⇒This is not a malfunction. When the AC adapter | — |
| activate. | is connected to the camera, the power saving |
|
|
| feature will not activate for at least 30 minutes. |
|
| The picture is | The power is not turned on. |
|
| not taken when | ⇒When the power save function is active, press | 22 |
| the shutter | the [MODE] button, or press the shutter | |
|
| ||
| release button | release button once to restore the power. |
|
| is pressed. | The standby indicator is flashing (the camera is |
|
|
| preparing to take a picture). | 21 |
|
| ⇒Wait until the standby indicator lights to take | |
Shooting |
|
| |
| the picture. |
| |
|
|
| |
|
| The memory is full (the standby indicator flashes |
|
|
| quickly, and the remaining images indication on |
|
|
| the LCD monitor shows “0”.) |
|
|
| ⇒Replace the card. | 17 |
|
| ⇒Remove the card and use the internal memory. |
|
|
| Or, when using the internal memory, insert a |
|
|
| card. |
|
|
| ⇒Erase unneeded pictures to free some memory. | 53 |
|
| Save the pictures you want to keep before | 57 |
|
| erasing data. | |
|
|
|
English 72