*[ h ] Fl1
*[ i ] Fl2
*[ c ] Daylight
*[ d ] Cloudy
*[ 
] Manual
Manual WB
This manually sets the white balance and stores it. Use of this is convenient when the white balance does not offer a good match. Before selecting [Execute] and before taking your image, place a white paper in the scene and set the white balance manually.
*Cancel / Execute
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO figure is increased), photography will become possible even in dark locations, but the more pixelated (grainier) the image will appear.
*Auto / 64 / 100 / 200 / 400 / 800
Metering
This sets the metering method for calculating the exposure.
*[ o ] Average: The entire area of the screen is measured, and the exposure is calculated.
*[ q ] Spot: A very small portion of the center of the screen is measured, and the exposure is calculated.
Sharpness
This sets the sharpness of the image that will be captured.
*Hard / Normal / Soft
Saturation
This sets the saturation of the image that will be captured.
*High / Normal / Low
CaptureMd.
This sets the recording method at the time of capturing images.
*[Blank] Single:Captures one image at a time.
*[ 
] Cont.: Permits continuous capture of up to 3 images.
*[ 
] AEB: Permits 3 consecutive images in the order of standard exposure, underexposure and overexposure compensation.
Date Print
The date of recording can be printed directly on the still images. This function must be activated before the image is captured.
*On / Off
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography. | ||
* On / Off | ||
|