Connecting to a PictBridge Compatible Printer
Read this section if the model you purchased is included with the PictBridge functions. If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the
Connecting the camera to the printer
1. | Connect one end of the USB cable to your |
|
|
USB |
| ||
| camera. |
| |
| PC |
| |
2. | Connect the other end of the USB cable to the | Next Menu | |
| USB port on the printer. | Printer | |
|
|
|
3.Turn on your camera.
4.Select [Printer] with the c / d buttons, and press the SET/DISPLAY button.
SET:Enter
Printing images
When the camera is properly connected to a PictBridge compliant printer and set to [Printer], the PictBridge menu is displayed on the monitor.
1. Select the item you want to configure with the |
|
| |
PictBridge |
| ||
c / d buttons, and press the SET/DISPLAY |
| ||
Images | Next Menu | ||
button. | |||
[Images]: Select whether you want to print | Date Print | Off | |
specific image or all images. You may also | Paper Size | Default | |
Layout | Default | ||
select printing number for specific image. | |||
| |||
[Date Print]: According to the printer type, |
| ||
|
| ||
select whether you want to print the image |
| SET:Enter | |
with date imprint or not. |
|
| |
[Paper Size]: Select the desired paper |
|
| |
size according to the printer type. You can select [Default], [L | Format], [2L | ||
Format], [Postcard], [Card], [10 x 15cm], [4 x 6] or [A4]. |
|
[Layout]: Select the desired printing layout according to the printer type. You can select [Default], [1 Up], [2 Up], [3 Up], [4 Up], [Index] or [No Border]. [Print]: After all settings are configured, select this item to start printing.
2. If you select [Images] in the previous step, the
figure shown on the right hand side will appear. Select [Single], [All] with the c / d buttons, and press the SET/DISPLAY button.
[Single]: Select to print one specific image.
[All]: Select to print all images.
[Exit]: Exit from Images option.
SET:Enter