Sanyo XP51L, PLC-XP50L owner manual Picture Image Adjustments, Image Adjust Menu

PICTURE IMAGE

PICTURE IMAGE ADJUSTMENTS

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT buttons to move a red frame pointer to
	IMAGE ADJUST Menu icon.
2	Press POINT UP/DOWN button to move a red frame pointer to
	item that you want to adjust and then press SELECT button.

Level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s).

Contrast

Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. (From 0 to 63.)

Color

Press POINT LEFT button to lighten color, and POINT RIGHT button to deeper color. (From 0 to 63.)

Tint

Press POINT LEFT button or POINT RIGHT button to obtain proper color. (From 0 to 63.)

Color Management

The Color management function can be used to adjust the level, phase and gamma of the selected display colors on the screen, and to replace these colors with other colors if required.

The projector lets you replace up to eight colors for each image. There are four preset images for VIDEO mode and four preset images for PC, giving a total of eight images.

1	Press the POINT UP/DOWN button to move the red frame point-
	er to "COLOR MANAGEMENT", and then press the SELECT
	button. The COLOR MANAGEMENT menu will appear and
	pointer mode will be enabled. The image that was being project-
	ed when the button was pressed will be paused, and the COLOR
	MANAGEMENT POINTER will appear.
2	Use the POINT buttons to move the pointer to a section of the
	paused image that contains the color that you would like to
	adjust, and then press the SELECT button. The mode will
	change to COLOR SELECTION mode, and the color in the cen-
	ter of the pointer will be selected and adjustment will be possi-
	ble.
3	Use the POINT buttons to adjust the level and phase of the
	color, and then press the SELECT button to confirm the setting.

Next, use the POINT buttons to adjust the gamma correction for the color, and then press the SELECT button to accept the set- ting. When the SELECT button is pressed, the mode will change to LIST mode.

IMAGE ADJUST MENU

IMAGE ADJUST

Menu icon

Move a red frame pointer to item to be selected and then press SELECT button.

Press POINT LEFT/RIGHT buttons to adjust value.

POINTER MODE

COLOR

MANAGEMENT

POINTER

NOTE;

Press the COLOR M. button on the remote con- trol to display the COLOR MANAGEMENT menu. If you would like to check or re-adjust a color management setting that has already been made, press the COLOR M. button on the remote control once more to change to LIST mode.

34