COMPUTER INPUT
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
When connect a computer output [5 BNC Type (Green, Blue, Red, INPUT MENU Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V
jacks.
1 | Press MENU button and |
POINT LEFT/RIGHT button to move a red frame pointer to |
INPUT Menu icon.
INPUT Menu icon
Move a pointer (red arrow) to Input 2 and press SELECT button.
2 | Press POINT UP/DOWN button to move a red arrow pointer to | Input 2 |
Input 2 and then press SELECT button. Source Select Menu will | ||
| appear. |
|
3 | Press POINT UP/DOWN button and a |
|
appear. Move arrow to "RGB", and then press SELECT button. |
|
Source Select Menu
Move a pointer to RGB and press SELECT button.
AUTOMATIC MULTI-SCAN SYSTEM
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 49). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to be set manually.)
The projector displays one of the Auto,
Auto
When projector cannot recognize connected signal as PC system provided in this projector, Auto PC Adjustment function operates to adjust projector and message “Auto” is displayed on SYSTEM Menu icon.
When image is not provided properly, manual adjustment is required. (Refer to P26 and 27.)
PC SYSTEM MENU
PC SYSTEM Menu icon Displays system being selected.
––––There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 46.)
Mode 1 User preset adjustment in MANUAL PC ADJUSTMENT. Adjustment data can be stored in the Mode
SVGA 1 Computer systems provided in the projector. The projector chooses proper system and displays it.
✽Mode 1 and SVGA 1 are examples.
SELECT COMPUTER SYSTEM MANUALLY
This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually.
1 | Press MENU button and |
POINT LEFT/RIGHT buttons to move a red frame pointer to PC | |
| SYSTEM Menu icon. |
2 | Press POINT UP/DOWN button to move a red arrow pointer to |
| system that you want to set, and then press SELECT button. |
PC SYSTEM MENU
PC SYSTEM Menu icon Displays system being selected.
Systems on this dialog box can be selected.
Custom Mode (1~5) set in PC
ADJUST Menu. (P26, 27)
24
