Sanyo XS1852, PNR-XS2432 installation instructions For stranded wiring, Screwdriver. Fig

Loose wiring may cause the terminal to overheat or result in unit malfunction. A fire hazard may also exist. Therefore, ensure that all wiring is tightly connected.

When connecting each power wire to the correspond- ing terminal, follow the instructions on “How to connect wiring to the terminal” and fasten the wire securely with the fixing screw of the terminal plate.

6-5. How to Connect Wiring to the Terminal

■For solid core wiring (or F-cable)

(1)Cut the wire end with a wire cutter or wire-cutting pliers, then strip the insulation to expose the solid wire about 1 in.. (Fig. 6-3)

(2)Using a screwdriver, remove the terminal screw(s) on the terminal plate.

(3)Using the pliers, bend the solid wire to form a loop suitable for the terminal screw.

(4)Shape the wire loop properly, position it on the terminal plate and fix it securely with the terminal screw using a screwdriver.

■For stranded wiring

(1)	Cut the wire end with a wire cutter or wire-cutting
	pliers, then strip the insulation to expose the
	stranded wiring about 3/8 in.. (Fig. 6-4)
(2)	Using a Pillips head screwdriver, remove the
	terminal screw(s) on the terminal plate.

in.	Solid wire
1	Loop
Strip

Insulation

1004_M_I

Fig. 6-3

	Stranded wire
in.	Ring
3/8
	pressure
Strip
	terminal
	1106_M_I

Fig. 6-4

(3)	Using a ring connector fastener or pliers, securely
	clamp each stripped wire end with a ring pressure
	terminal. (Fig. 6-4)
(4)	Place the ring pressure terminal, and replace and
	tighten the removed terminal screw using a
	screwdriver. (Fig. 6-5)

Special	Screw
washer
	Ring pressure
	terminal
Wire	Terminal plate
	Wire

Fig. 6-5

Screw and Special washer

Ring connector

1308_M_I

20S4359128