MOUNT CARRIER TO VEHICLE CONTINUED:
2
| 3 |
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Insert rack into the receiver base and insert long bolt into receiver and rack as shown.
5
Attach 1/2”washer.
Insert pin into bottom hole as shown.
(Note: Pin can be removed when rack is empty to fold rack down. Do not drive with rack in down position)
6
Attach nut
Secure with clip.
7 |
Place lanyard ring around sleeve. Insert final bolt into receiver base, through sleeve and out through the other side of the receiver base.
8
9
Attach 3/8” washer and nut. Tighten with a 9/16” wrench.
Attach bolt and securely tighten all bolts with two 3/4” wrenches.
