SATO 9001147B manual Rfid Hardware Configuration, Rfid Antenna Specifications

RFID HARDWARE CONFIGURATION

The RFID hardware kit is comprised of the: RFID Module, RFID Antenna w/coaxial cable, RFID Cable Set. The figure below displays configuration:

RFID ANTENNA SPECIFICATIONS

Module	85.47 x 53.98 x 7.62 mm (sealed in a shield case)
Antenna	16 x 118 x 1.6 mm

RFID READER SPECIFICATIONS

Name	ALR-9930 (module by Alien Technology)
Frequency	902-928 MHz
Communication System	Frequency hopping spectrum dispersion
Transmission Output	Maximum 1W (30 dBm), Uses less than 250mW
Transmission Output Control	14dB and 0.1 dB steps
Communications Protocol	EPC global UHF, Class 1
Source Voltage	5-6 V +/- 3%
Demand Current	Maximum 650 mA
Electrostatic Voltage Resistance	ESD Class 2

SATO RFID User Guide PN 9001147B Page 2