Safety Precautions
Caution
Do not place in areas with high humidity
•Do not place the printer in areas with high humidity or where con- densation forms. If condensa- tion forms, immediately turn off the power switch and do not use the printer until it dries. Using
the printer while condensation is on it could result in electric shock.
Carrying the Printer
• When moving the printer, always unplug the power cord from the outlet and check to make sure all external wires are disconnected before moving it. Moving the printer with the wires still connected could damage the cords or connecting wires and result in a fire or electrical shock.
•Do not carry the printer with paper loaded in it. The paper could fall out and cause an injury.
•When setting the printer on the floor or a stand, make sure not
to get your fingers or hands pinched under the printer feet.
Power supply
•Do not operate the power switch or plug in/unplug the power cord with wet hands. Doing so could result in electric shock.
Power cord
•Keep the power cord away from hot devices. Getting the power cord close to hot devices could cause the cord’s covering to melt and cause a fire or electri- cal shock.
•When unplugging the power cord from the outlet, be sure to hold it by the plug. Pulling it by the cord could expose or break the core wires and cause a fire or electric shock.
•The power cord set that comes with the printer is especially
made for this printer. Do not use it with any other electrical devices.
Top cover
• Be careful not to get your fin- gers pinched when opening or closing the top cover. Also be careful the top cover does not slip off and drop.
Print head
•The print head is hot after print- ing. Be careful not to get burned
when replacing paper or clean- ing immediately after printing.
• Touching the edge of the print head immediately after printing could result in injury. Use cau- tion when replacing the label or cleaning the print head.
•You should not replace the print head without having received the proper training.
Loading paper
• When loading roll paper, be careful not to get your fingers pinched between the paper roll and the supply unit.
When not using the printer for a long time
• When not using the printer for a long time, unplug the power cord from the outlet to maintain safety.
During maintenance and cleaning
• When maintaining and cleaning the printer, unplug the power cord from the outlet to maintain safety
Page ii | CG4 Series Quick Guide |
