8
5 troubleshooting
WARNING: Unplug trimmer from power source before servicing. Severe injury or death could occur from fire, electrical shock, or body contact with moving blades.
Note: For additional help, visit our technical ser vice web site at
www.desatech.com.
OBSERVED FAULT | POSSIBLE CAUSE | REMEDY |
Motor does not run when you squeeze trigger switches
1.Both trigger switches are not fully depressed at the same time
1.Fully squeeze both front and rear trigger switches (see Basic Trimmer Operation, page 5)
| 2. | Extension cord connection is loose | 2. | Check cord connections |
| 3. | Household circuit breaker is tripped | 3. | Check circuit breaker or line fuse |
|
| or open line fuse |
|
|
|
|
| ||
Motor runs, but cutting blades do not | Trimmer damaged. Do not use trimmer | Contact DESA Specialty Products™ if still | ||
move |
|
| under warranty | |
|
|
| ||
Trimmer smokes during operation | Trimmer damaged. Do not use trimmer | Contact DESA Specialty Products™ if still | ||
|
|
| under warranty | |
Technical Service
You may have further questions about assembling, operating, or maintain- ing this hedge trimmer. If so, you can visit our Technical Service web site at www.desatech.com or contact our Technical Service Department at
DESA Specialty Products™
ATTN: Technical Service Specialty Products
P.O. Box 90004
Bowling Green, KY
When contacting DESA Specialty Prod- ucts™, have ready
•Your Name
•Your Address
•Your Phone Number
•Model Number of Product
•Date of Purchase (include copy of receipt for written requests)
118036
