M-10e Quick Guide

Pg 7

Operation Panel

LCD Display

2 Lines x 16 Character display

POWER LED

Illuminated when power is applied

ERROR LEDs

Illuminated when errors occur

ON-LINE LED

Illuminated when printer is On-Line

LINE Key

Switches the printer On-Line or Off-Line. It can also be

 

used as a Pause function key to stop label during the

 

printing process. Also used as an UP cursor control

FEED Key

To feed 1 blank label. When On-Line, the printer will print

 

another copy of the last label. Also used as a DOWN

 

cursor control

RIGHT CURSOR >>

To move the cursor to the right

LEFT CURSOR <<

To move the cursor to the left

ENTER

Selects setting

DIP Switch Panel

The DIP Switch Panel is located inside the cover and contains two 8-position DIP switches and four adjustment potentiometers.

M-10e Quick Guide

Pg 8

Printer DIP Switch Configuration

There are two DIP switches (DSW2 & DSW3) located on the left side of the printer under a flip-up cover. Raise the Top Cover for access to these switches. In addition, a third DIP switch is located on the RS232C Serial Adapter card and is used to set the RS232C transmit/receive parameters. These switches can be used to set:

8.Thermal Transfer of Direct Thermal Mode

9.Label Sensor Enable / Disable

10.Head Check Mode

11.Hex Dump Mode

12.Single Job or Multi-Job Receive Buffer

13.Operation Mode

Each switch is an eight section toggle switch. The ON position is always to the left. To set the switches, first power the unit Off, then position the DIP switches. Finally, after placing the switches in the desired positions, power the printer back On. The switch settings are read by the printer electronics during the power up sequence. They will not become effective until the power is cycled.

RS232 Transmit/Receive Setting

Data Bit Selection (DSW1-1)- This switch sets the printer to receive either 7 or 8 bit data bits for each byte transmitted.

Parity Selection (DSW1-2,DSW1-3)– These switches select the type of parity used for error detection.

Stop Bit Selection (DSW1-4)– Selects the number of stop bits to end each byte transmission.

Baud Rate Selection (DSW1-5,DSW1-6)– Selects the data rate (bps) for the RS232 port.

Protocol Selection (DSW1-7,DSW1-8)– Selects the flow control and status reporting protocols.

Printer Set Up

Print Mode Selection (DSW2-1) – Selects between direct thermal printing on thermally sensitive paper and thermal transfer printing using a ribbon.

Sensor Type Selection (DSW2-2)– Selects between the use of a label gap or a reflective Eye-Mark detector

Page 9 Page 10
Page 10
Image 10
SATO M-10e manual Operation Panel, DIP Switch Panel, Printer DIP Switch Configuration, RS232 Transmit/Receive Setting
Page 9 Page 10

M-10e specifications

The SATO M-10e is a state-of-the-art label printer designed specifically for industries that require reliable, high-quality printing solutions. This robust printer incorporates advanced technologies, making it ideal for labels in various sectors, including healthcare, logistics, retail, and manufacturing.

One of the standout features of the SATO M-10e is its exceptional print resolution. With a maximum resolution of 600 dpi, it ensures crisp, clear, and detailed labels that are essential for barcodes, logos, and intricate designs. This level of resolution not only enhances the readability of printed information but also reinforces branding through high-quality visuals.

The M-10e employs the latest Thermal Transfer printing technology, which allows for a wider range of media compatibility. Users can print on various substrates, including paper, synthetic materials, and specialty media. This versatility makes the M-10e suitable for different applications, from product labeling to shipping tags.

In terms of speed, the SATO M-10e performs admirably, capable of printing up to 8 inches per second. This high printing speed is crucial for environments with demanding operational timelines, ensuring efficiency without compromising quality. The printer's fast processing capabilities are supported by its powerful onboard processor, allowing for quick data handling and print jobs.

Another key characteristic of the M-10e is its user-friendly interface. The printer is equipped with an intuitive LCD display that simplifies navigation through its various settings and features. Additionally, the M-10e is designed for easy media loading, minimizing downtime and allowing users to switch between different label formats with ease.

Connectivity options are also robust, with the M-10e featuring USB, Serial, and Ethernet ports. This ensures seamless integration into existing IT infrastructure, whether standalone or networked environments. Moreover, the printer is compatible with various programming languages, making it straightforward to deploy in diverse applications.

The SATO M-10e is engineered with durability in mind. Built to withstand the rigors of industrial environments, it offers a solid construction that ensures longevity and reliability. With its combination of high performance, ease of use, and adaptability, the SATO M-10e stands out as a premier choice for businesses seeking an effective labeling solution to meet their operational needs.
Top Page Image Contents