SATO M-10e manual Table of Contents, 10e Specifications

M-10e Quick GuidePg 1

Table of Contents

Installation ...………..…………………………………………………….….… 2

Installation ……………………………………………………….……. 2

Components …………………………………………………………… 3

Media Loading ………………………………………….……………………… 5

Ribbon Loading ….......……………………………..……………...….. 5

Label Stock Loading ...………………………………………………… 6

Operation Panel ……………...………………………………………………… 7

DIP Switch Panel ………………………………….…………………………… 7

Printer DIP Switch Configuration ……………………………………………. 8

RS232 Transmit/Receive Setting ……………………………………… 8

Printer Set Up …………………………………………………………. 8

Troubleshooting ……….……………………………………..………………… 10

Initial Checklist ..………………………………………………………. 10

Using the IEEE1284 Parallel Interface ………………………………… 10

Using the RS232C Serial Interface …………………………………….. 11

Using the USB Interface ……………………………………………….. 12

Using the LAN Eternet Interface ………………………………………. 12

Error Signals …………………………………………………………… 13

M-10e Specifications …………………………………………………………….14

Accessories & Options …………………………………………………………. 15

This Quick Guide was prepared to get you up and running quickly. It will enable you to get your new SATO M-10e installed and printing with a minimum of effort. However, it is recommended that you familiarise yourself with the contents of the Printer’s Operator Manual for detailed descriptions so you will be able to properly use the printer to its full potential.

M-10e Quick Guide		Pg 14
M-10e Specifications
		SPECIFICATION
	PRINT
	Method	Thermal Transfer or Direct Thermal
	Speed (User Selectable)	3 – 5 ips (75 – 125 mm/s)
	Processor	32-Bit RISC, 133MHz
	Resolution	305dpi (12 d/mm)
	Maximum Print Length	16.5” (420mm)
	Maximum Print Width	10.5” (266mm)
	MEDIA
	Width	5.16” – 11.8” (131mm – 300mm)
	Minimum Length	1.7” (43mm)
	Roll OD (Maximum)	7.8” (200mm), Wound Face-In
	Label Sensing	See-Thru, Reflective Eye-Mark, Continuous Forms
	RIBBON
	Maximum Length	984ft (300m)
	Widths	6.5” (165mm), 8.7” (220mm), 10.7” (273mm)
	Thickness	4.5 micron, Wound Face-In
	PRINT-OUTS
	Vector Fonts	Proportional or Fixed Spacing
		Font Size 50 x 50 dots to 999 x 999 dots
		Helvetica, 10 Font Variations
	Graphics	Dot Addressable, Sato Hex/Binary, .bmp or .pcx
	Bar Codes	19 including Four (4) 2-D Bar Codes
	Rotation	Text & Bar Codes can be rotated 90o, 180o & 270o
	PHYSICAL
	Dimension	W18.7” x D12.3” x H12.6”
		475mm x 313mm x 319mm
	Weight	50.7 lbs (23 Kg)
	POWER REQUIREMENTS
	Voltage	Autoswitching 100-240V (± 10%); 60Hz (±1%)
	Power Consumption	40W Idle; 560W Operating
	ENVIRONMENTAL
	Operating	5 – 40oC; 30 – 80% RH, Non Condensing
	Storage	-5 – 60oC; 30 – 90% RH, Non Condensing
	Optional Accessories
	Options	Label Cutter; Real Time Clock; Memory Expansion;
		Stacker; Label Un-winder
	Approvals
	Safety / RFI/EMI	UL, CSA, TUV, FCC Class B