Gas-Fired Products PTS Series, PTU Series manual Table Of Contents

TABLE OF CONTENTS

SECTION	DESCRIPTION	PAGE
1.0)	Safety	2
2.0)	Installer Responsibility	2
3.0)	General Information	2
4.0)	Minimum Clearances to Combustibles	4
5.0)	Specifications	5
6.0)	Packing List	5
6.1)	Accessory Packages	9
7.0)	Typical Layouts – PTS/U Series	11
7.1)	Typical Assembly Layout	12
8.0)	Dimensions – PTS Series	13
8.1)	Dimensions – PTU Series	14
8.2)	Heater Assembly / Joining of Tube Sections	15
9.0)	Typical Suspension Methods	17
10.0)	Assembly of Tube Sections	18
10.1)	Assembly of Extension Section	19
10.2)	Inserting Turbulators	20
10.3)	Adding Body Reflectors	21
11.0)	Adding Optional 90º Elbow (PTS Only)	22
11.1)	Adding Optional Corner Reflector (PTS Only)	22
11.2)	Adding 180º U-Bend (PTU Only)	23
11.3)	Adding Optional U-Bend Reflector (PTU Only)	23
12.0)	Attaching Control Box Assembly	24
12.1)	Connecting The TISS System	25
13.0)	Gas Connections And Regulations	28
14.0)	Instructions For Pressure Test Gauge Connection	30
15.0)	Electrical Connections	31
16.0)	Venting	34
17.0)	Air For Combustion	38
17.1)	Direct Outside Air For Combustion	38
18.0)	Lighting and Shutdown Instructions	40
19.0)	Sequence of Operation	40
20.0)	Burner Component Location	41
21.0)	Cleaning And Annual Maintenance	42
22.0)	Troubleshooting Guide	43
23.0)	Replacing Parts	46
23.1)	Removal of Main Burner And Electrodes	46
23.2)	Removing Gas Valve And Manifold Assembly	47
23.3)	Air Switch Pressure Check	47
23.4)	Ignition System Checks	48
24.0)	Installation Data	49
25.0)	Replacement Parts Guide	50

This heater complies with ANSI Z83.20 (current standard) and CSA 2.34. Copies of the National Fuel Gas Code (ANSI Z223.1-latest edition) are available from the CSA at 8501 East Pleasant Valley Road, Cleveland, Ohio 44131 or 55 Scarsdale Road, Don Mills, Ontario M3B 2R3. All NFPA codes are available from the National Fire Protection Association, Batterymarch Park, Quincy, Massachusetts 02269.

Form #43343330
May 08	–1–