Gas-Fired Products PTS Series, PTU Series Step Step, Removal Of Gas Valve And Manifold Assembly

23.2) REMOVAL OF GAS VALVE AND MANIFOLD ASSEMBLY

Step 1

Step 3

Remove side access panel.

Open hinged access panel and disconnect wires from gas valve.

Step 2

Step 4

Loosen screws from manifold clamp and burner assembly.

Remove (6) screws from end panel. Rotate gas valve and manifold assembly slightly counter-clockwise and slide out from housing.

23.3) AIR SWITCH PRESSURE CHECK

Air	Connector
Switch	Tees

P1

+

P2	P1	P2
-	+
		-

Temporary 1/4” ID Silicone /	-	+
	0.65” WC
plastic tubing for pressure
		Digital or Inclined
test.
		Water Manometer

scale 0-2”w.c.

Common “C”

Normally open “NO”

Form #43343330
May 08	–47–