![](/images/new-backgrounds/1129191/12919113x1.webp)
6. Place the front panel in the slot of floor panel.
7.Place the top panel on the four side panels. Make sure the connection wires from the three side panels protrude through the corresponding holes of the top panel.
※Make sure the top panel’s arched side is facing to the front.
※Make sure the wire is through each hole smoothly and completely.
※Make sure trim of the top panel fits completely around the four side panels.
8.Make sure each of the lead wires on the top of the left, right, back and front panels is protruding through the top panel; then plug each of the four lead wires into the four connectors of the top panel.
| 5/25/07 |