Savin 1502, 1802, 1802d Guide to Components

1

Guide to Components

1. Platen cover or document feeder

(ADF) (option)

Lower the platen cover over originals

placed on the exposure glass for copying.

If you have the document feeder, insert a

stack of originals here. They will be fed

automatically.

2. Exposure glass

Position originals here face down for cop-

ying. See P.10 “Originals”.

3. Internal tray

Copied paper is delivered here face

down.

4. Ventilation hole

Prevents overheating. Do not obstruct

the ventilation hole by placing or leaning

an object near it. If the machine ov er-

heats, a fault might occur.

5. Main power switch

If the machine does not operate after

turning on the operation switch, check if

the main power switch is turned on. If it

is off, turn it on. However, if the machi ne

is installed with the fax option, do not

turn the main power off.

6. Main Power indicator

This indicator lights up when the main

power switch is turned on, and goes off

when the switch is turned off.

7. On indicator

This indicator lights up when the opera-

tion switch is turned on, and goes off

when the switch is turned off.

Contents

Main Page Page Page i Safety Information Safety During Operation R WARNING: ii R CAUTION: iii How to Read this Manual Symbols iv Machine Types This machine comes in two models which vary in copy speed. Page Page Page TABLE OF CONTENTS 1.Basics 2.Copying 3.Troubleshooting 4.User Tools (Copier Features) 5.Remarks 6.Specification Guide to Components 1. 2. 3. 4. Page Options 1. 2. 3. 4. Operation Panel Copier only Fax or printer installed 1. 2. 12. 13. 14. 15. 16. Panel Display Displays and Key Operations 1. 2. 3. 1. Basics Turning on the Power Turning on the Main Power A B 8 A Shutting Down the Machine A Turning Off the Main Power Changing Modes Originals Sizes and Weights of Recommended Originals Originals 11 Sizes Difficult to Detect Sizes detectable by the Auto Paper Select Original Sizes and Scanning Area/Missing Image Area Copy Paper Copy Paper Recommended Paper Sizes and Types The following limitations apply to each tray: Basics See P.31 Copying from the Bypass Tray. Important B Non-recommended Paper Paper Storage Toner Handling Toner D Toner Storage Used Toner Page 2. Copying Basic Procedure E A B Page Setting Originals Placing Originals on the Exposure Glass A B 1. 2. A B 1. 2. 23 When SADF mode is selected A B Setting Custom Original Size in the Document Feeder A B 24 Selecting paper from a paper tray Selecting paper from the bypass tray Basic Functions Adjusting Copy Image Density Selecting an Original Type 26 Selecting Copy Paper Auto Paper Select Manual Paper Select 27 A R Auto Paper Select R Manual Paper Select - -- -Rotate Copy (Type 1 requires the optional 16MB copier memory unit) Auto Reduce/Enlarge B Sort Sort 30 B C When setting a stack of originals in the document feeder When setting an original on the exposure glass or in the document feeder Copying from the Bypass Tray A B 1. C D 33 When copying onto custom size copy paper When copying onto non-detected standard size paper 34 When copying onto envelopes E 35 Other Functions User Codes Setting the User Code B C Preset Reduce/Enlarge A B 1. 2. D Zoom B When using the 0 or 1 key When using the number keys D Combine B C D E 40 Series Copies Book 1 Sided Book 1 Sided Combination Chart The following shows the combinations of functions.