Savin 1502, 1802, 1802d A, B, A, B

Setting Originals

23

2

When SADF mode is selected

ASet one original face up into the

document feeder. Then press the

{

{{

{Start}

}}

} key.

BWhen the machine instructs you

to set another original, set the

next page.

The second and subsequent origi-

nals can be fed automatically with-

out pressing the {Start} key.

Note

❒You can adjust the time the ma-

chine waits before being ready

for the next original. See

“6.SADF Auto Reset”in P.62

“Settings You Can Change with

the User Tools”.

Setting Custom Original Size

in the Document Feeder

Limitation

❒Enter the size o f your original if it

is not one of the following: A3L ,

B4JISL, A4KL, B5JIS KL,

A5KL, 11"× 17"L, 11"× 15"L,

81/2" × 14"L, 81/2" × 13"L, 81/2" ×

11"KL, 51/2" × 81/2"L

❒For ADF, the paper size that can be

set with this function is vertical

105–297mm, 4" × 12", horizontal

128–1,260mm, 5" × 50".

❒The maximum copy paper size is

297 × 432mm, 11" × 17".

❒You cannot use the Auto Paper Se-

lect function with this function.

ASet one original face up into the

document feeder.

BPress the {

{{

{Select Paper Tray}

}}

} to se-

lect your desired paper tray or by-

pass tray.

Contents

Main Page Page Page i Safety Information Safety During Operation R WARNING: ii R CAUTION: iii How to Read this Manual Symbols iv Machine Types This machine comes in two models which vary in copy speed. Page Page Page TABLE OF CONTENTS 1.Basics 2.Copying 3.Troubleshooting 4.User Tools (Copier Features) 5.Remarks 6.Specification Guide to Components 1. 2. 3. 4. Page Options 1. 2. 3. 4. Operation Panel Copier only Fax or printer installed 1. 2. 12. 13. 14. 15. 16. Panel Display Displays and Key Operations 1. 2. 3. 1. Basics Turning on the Power Turning on the Main Power A B 8 A Shutting Down the Machine A Turning Off the Main Power Changing Modes Originals Sizes and Weights of Recommended Originals Originals 11 Sizes Difficult to Detect Sizes detectable by the Auto Paper Select Original Sizes and Scanning Area/Missing Image Area Copy Paper Copy Paper Recommended Paper Sizes and Types The following limitations apply to each tray: Basics See P.31 Copying from the Bypass Tray. Important B Non-recommended Paper Paper Storage Toner Handling Toner D Toner Storage Used Toner Page 2. Copying Basic Procedure E A B Page Setting Originals Placing Originals on the Exposure Glass A B 1. 2. A B 1. 2. 23 When SADF mode is selected A B Setting Custom Original Size in the Document Feeder A B 24 Selecting paper from a paper tray Selecting paper from the bypass tray Basic Functions Adjusting Copy Image Density Selecting an Original Type 26 Selecting Copy Paper Auto Paper Select Manual Paper Select 27 A R Auto Paper Select R Manual Paper Select - -- -Rotate Copy (Type 1 requires the optional 16MB copier memory unit) Auto Reduce/Enlarge B Sort Sort 30 B C When setting a stack of originals in the document feeder When setting an original on the exposure glass or in the document feeder Copying from the Bypass Tray A B 1. C D 33 When copying onto custom size copy paper When copying onto non-detected standard size paper 34 When copying onto envelopes E 35 Other Functions User Codes Setting the User Code B C Preset Reduce/Enlarge A B 1. 2. D Zoom B When using the 0 or 1 key When using the number keys D Combine B C D E 40 Series Copies Book 1 Sided Book 1 Sided Combination Chart The following shows the combinations of functions.