19
2. Copying

Basic Procedure

AMake sure that the machine is in
Copy mode.
Note
If not, press the {Copy} key.
BWhen the machine is set for user
codes, enter the user code with
the number keys and then press
the {
{{
{#}
}}
} or {
{{
{OK}
}}
} key.
Reference
See P.35 “User Codes”.
CMake sure that there are no previ-
ous settings remaining.
Note
To clear settings, press the
{Clear Modes} key.
DSet your originals.
Reference
See P.21 “Setting Originals”.
ESet the desired settings.
FEnter the number of copies re-
quired with the number keys.
Note
The maximum copy quantity
can be set between 1 and 99 (de-
fault: 99). See “2.Max. Copy
Q’ty” in P.62 “Copier Features”.
To change the number entered,
press the {Clear/Stop} key and
enter the new number.
GPress the {
{{
{Start}
}}
} key.
The machine starts copying.
Note
To stop the machine during the
multi-copy run, press the {Clear/
Stop} key.
To return the machine to the in-
itial condition after copying,
press the {Clear Modes} key.
For Type 1 without the optional
16MB copier memory unit, you
cannot copy more than 1 page
from the document feeder.