Savin 1502, 1802, 1802d D

Copying

32

Note

❒Set the direction of the copy pa-

per to L.

❒Swing out the extender to sup -

port paper sizes larger than

A4L, 81/2" × 11"L.

❒Fan paper to get air between the

sheets and avoid a multi-sheet

feed.

When copying onto OHP

transparencies

ALightly insert the OHP trans-

parencies face down and ad-

just the paper guide.

Important

❒The side of OHP transparen-

cies that is copied is fixed. Be-

fore you set the OHP

transparencies in the bypass

tray, check the cutting posi-

tion of the OHP transparen-

cies.

DPush do wn the paper guide re-

lease lever.

“ Bypass” is selected automati-

cally.

Note

❒If you set A4, 81/2" × 11" or larg-

er copy paper, hold the edge of

the paper and push down the

paper guide release lever.

❒If you do not push down the pa-

per guide release lever, a mis-

feed might occur.

Contents

Main Page Page Page i Safety Information Safety During Operation R WARNING: ii R CAUTION: iii How to Read this Manual Symbols iv Machine Types This machine comes in two models which vary in copy speed. Page Page Page TABLE OF CONTENTS 1.Basics 2.Copying 3.Troubleshooting 4.User Tools (Copier Features) 5.Remarks 6.Specification Guide to Components 1. 2. 3. 4. Page Options 1. 2. 3. 4. Operation Panel Copier only Fax or printer installed 1. 2. 12. 13. 14. 15. 16. Panel Display Displays and Key Operations 1. 2. 3. 1. Basics Turning on the Power Turning on the Main Power A B 8 A Shutting Down the Machine A Turning Off the Main Power Changing Modes Originals Sizes and Weights of Recommended Originals Originals 11 Sizes Difficult to Detect Sizes detectable by the Auto Paper Select Original Sizes and Scanning Area/Missing Image Area Copy Paper Copy Paper Recommended Paper Sizes and Types The following limitations apply to each tray: Basics See P.31 Copying from the Bypass Tray. Important B Non-recommended Paper Paper Storage Toner Handling Toner D Toner Storage Used Toner Page 2. Copying Basic Procedure E A B Page Setting Originals Placing Originals on the Exposure Glass A B 1. 2. A B 1. 2. 23 When SADF mode is selected A B Setting Custom Original Size in the Document Feeder A B 24 Selecting paper from a paper tray Selecting paper from the bypass tray Basic Functions Adjusting Copy Image Density Selecting an Original Type 26 Selecting Copy Paper Auto Paper Select Manual Paper Select 27 A R Auto Paper Select R Manual Paper Select - -- -Rotate Copy (Type 1 requires the optional 16MB copier memory unit) Auto Reduce/Enlarge B Sort Sort 30 B C When setting a stack of originals in the document feeder When setting an original on the exposure glass or in the document feeder Copying from the Bypass Tray A B 1. C D 33 When copying onto custom size copy paper When copying onto non-detected standard size paper 34 When copying onto envelopes E 35 Other Functions User Codes Setting the User Code B C Preset Reduce/Enlarge A B 1. 2. D Zoom B When using the 0 or 1 key When using the number keys D Combine B C D E 40 Series Copies Book 1 Sided Book 1 Sided Combination Chart The following shows the combinations of functions.