Copy Mode

9

1
DPress the {
{{
{Interrupt}
}}
} key again.
The machine resumes the printing
job of the received fax document.

Resuming the interrupted

copying job

AReset the previous original.
BPress the {
{{
{Start}
}}
} key.
The machine resumes the inter-
rupted copy run.

Copying and Multi-accessing

If you want to make copy while using
another function, follow the proce-
dure below.
APress the {
{{
{Interrupt}
}}
} key.
The interrupt display appears on
the panel display.
BSet originals, and then press the
{
{{
{Start}
}}
} key.
The machine interrupts the job that
is printing and starts copying your
originals.
CWhen copying is complete, re-
move your originals and the cop-
ies.
DPress the {
{{
{Interrupt}
}}
} key again.
The previous job settings will be
restored and the machine will con-
tinue from where it left off.
Note
Machine operations are differ-
ent depending Print Priority
( P.34 General Features 1/2) or
User Code Management (
P.34 General Features 1/2) set-
tings.
Reference
P.17 Multi-Access

When “Print Priority” = “Fax”,

“Printer”, or “Display” (default)

The machine completes the op-
eration of the function set by
Print priority before performing
the operation of another func-
tion.
Limitation
While the machine is per-
forming two-sided printing
in fax mode, you cannot
make two-sided copies until
the printing ends.

When “Print Priority” = “Inter-

leave”

The machine performs the oper-
ations in the order in which they
are initiated. If another function
is initiated during operation,
the machine completes the cur-
rent operation before perform-
ing the operation of the function
initiated.
AdonisC2-sysEN122F_FM.book Page 9 Thursday, February 1, 2001 1:46 PM