Settings You Can Change with the User Tools
41
3
Timer SettingWhen entering Set Time mode, if a key operator code has already been set, you
must enter the code (up to 8 digits). ⇒ P.49 “User Code”.
❖
❖❖
❖Auto Off Timer
The machine turns off automatically to conserve energy after a spec ified
amount of time has past after a job. This function is called "Auto Off". The
Time can be set from 10 seconds to 240 minutes.
Note
❒Default: 1 minute
❒Enter numbers with number keys
❒Use [←
←←
←] and [→
→→
→] keys to switch between minites and seconds.
❒Auto off may not work while an error is displayed.
❖
❖❖
❖Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or no operations are performed with the machine.
Note
❒The default setting is the same time interval as Auto Off Timer, so the Pan-
el Off Timer is not used. This setting is only used if the Auto Off Timer set-
ting is set to a longer interval than the Panel Off Timer setting.
❒The warm up time for making a copy from standby mode is three seconds.
❒The default setting is 1 minute
❒Enter a time interval between 10 seconds and 240 minutes with the number
keys.
❒Press the [←
←←
←] or [→
→→
→] keys to move the cursor between minutes and sec-
onds.
❖
❖❖
❖System Reset Timer
The System Reset setting is a setting that automatically switches to the screen
for the function set in Function Priority. This happens if no operations are per-
formed or to when clearing an interruputed job. This setting sets the system
reset interval.
Note
❒Default: Yes, 60 seconds
❒The time can be set from 10 to 999 seconds.
❖
❖❖
❖Copier/Document Server Auto Reset Timer
Set the time interval after which the copy function and document server func-
tion are reset.
AdonisC2-sysEN122F_FM.book Page 41 Thursday, February 1, 2001 1:46 PM