5
11. Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off). ⇒”Turning On the
Power” in the General Settings Guide.
12. Clip Tray
Holds clips and staples.
13. {
{{
{Sample Copy}
}}
} key
Use this key to make a single sample
copy before starting a long copy run. By
checking the sample copy and making
any necessary changes to the image qual-
ity settings before you make multiple
copies, you can save time and paper. ⇒
p.40 “Sample Copy”
14. {
{{
{Start}
}}
} key
Press to start copying. Press to start scan-
ning and printing in Document Server
mode.
15. {
{{
{Clear/Stop}
}}
} key
•Clear
Press to delete a number entered.
•Stop
Press to stop a copy job in progress.
Press to stop Scanning and printing in
Document Server mode.
16. {
{{
{#}
}}
} key
Press to enter a value.
17. Number keys
Use to enter the desired number of cop-
ies, and data for selected modes.
18. Function keys
These keys switch display to the operat-
ing screen of each function. Follow the in-
structions displayed by switching
between screen with the function keys.
19. Function Status indicator
These show the status of the above func-
tions:
•Green: the function is active.
•Red: the function has been interrupt-
ed.
Common Key OperationsThe following keys are common to all screens.
[Exit]Returns to the previous screen.
[Cancel]Deletes a selected function or entered values, and then re turns
to the previous screen.
[OK]Acknowledges a selected function or entered values, and then
returns to the previous screen.
[▲Prev.] [▼Next]Moves to the previous or next page when all the functions can-
not be displayed on one page.