1
User Tools (System Settings)
Menu | Description |
|
|
ADF Orig. Ejection | As a default setting, the scanned originals from the docu- |
| ment feeder are ejected to the ADF external tray. If there is |
| no space to attach an ADF external tray, you can change the |
| output tray to the ADF tray. However, if the output tray is |
| set to the ADF tray, it takes a little more time than to the |
| ADF external tray. |
| Note |
| ❒ Default: ADF Ext. Tray |
| ❒ Even if the ADF external tray is set, papers are ejected to |
| the ADF tray in 2 Sided → 2 Sided copy mode. |
|
|
<F/F4>Size Setting | Currently three types of F size are available; 81/2" × 13", 81/ |
| 4" × 13" and 8" × 13". |
| The document feeder or platen cover sensor cannot distin- |
| guish these 3 types of originals. |
| This function sets the F size from the document feeder or |
| platen cover sensor. |
| Auto Paper Select or Auto Reduce/Enlarge can be used for |
| F size originals based on this setting. |
Note
❒ Default: 81/2" × 13" L
Basic Page 2
Menu | Description |
|
|
System Reset | If no operation is performed for a selected time after inter- |
| rupt copying, the interrupt copying will be canceled. This |
| function is called “System Reset”. The time can be set from |
| 10 to 999 seconds, or 0. |
| Note |
| ❒ Default: 60sec. |
| ❒ When the time is set to “0”, System Reset will not be ac- |
| tivated. |
|
|
Function Priority | You can specify the mode that is displayed when the opera- |
| tion switch is turned on or System Reset is activated. |
Note
❒Default: Copy
10
