Settings You Can Change with the User Tools, Basic

Settings You Can Change with the User Tools

For how to access the User Tools, see ⇒ P.4 “Accessing the User Tools (System Settings)”.

Basic Page 1

Menu	Description

Operation Panel Beeper	The beeper (key tone) sounds when a key is pressed.
	This beeper can be turned on or off.
	Note
	❒ Default: On

Ready Operation Panel	Specify whether to sound the beeper when the machine be-
Beeper	comes ready for copying immediately after Energy Saver
	mode is deactivated or the power is turned on.
	Note
	❒ If the “Operation Panel Beeper” setting is “Off”, the
	beeper does not sound irrespective of the “Ready Opera-
	tion Panel Beeper” setting.
	❒ Default: On

Copy Count Display	The copy counter can be set to show the number of copies
	made (count up) or the number of copies remaining to be
	made (count down).
	Note
	❒ Default: Up (count up)

Auto Response (Hu-	If the machine does not detect anyone using it for a certain
man) Sensor	period of time, it will switch automatically to one of the reset
	modes – Auto Reset, System Reset, Energy Saver mode, Low
	Power mode or Auto Off. You can cancel this setting.
	If “Low Power Timer” is set to “0”, “Auto Response (Hu-
	man) Sensor” is disabled.

Note

❒Default: Yes (On)

See “Low Power Timer” in ⇒ P.7 “Basic Page 1”.