JVC LVT1774-001A manual Initial settings, Select an item, Back to the previous setting

ENGLISH

Initial settings

When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure below and make necessary settings.

Turn on the power.

Language

English US

Español

Français

Adjust the following settings.

Select an item	5	DST
Proceed to the next setting		Select Auto if your residential area is
		subject to DST (Daylight Saving Time).
	6	Reverse Polarization

		Back to the previous setting	Engage the parking brake, step on the
1	Language		brake pedal, then switch the gear lever.
			If Forward and Reverse alternates
	Select the language you want for the		on the display, connection is correct.
	display and the voice guidance.		Select one of the alternatives (GND or
2	Store Display Mode		Battery) that shows the gear position
			correctly.

Select Off.
• If you select On, the System starts in	Finish the procedure.
the navigation demonstration mode
for shops. (☞[47])

3Installation Angle

Select which angle your unit is installed at. This setting is necessary for the precise functioning of the Navigation System.

•See “Measuring the installation angle” on the Installation/Connection Manual.

4Time Zone

Select your residential area for clock adjustment.

You can also change these settings (except Store Display Mode) through Setup Menu and AV Menu when necessary.

•Language ☞[46]

•Installation Angle ☞[46]

•Time Zone ☞[91]

•DST ☞[91]

•Reverse Polarization ☞[94]

8