ENGLISH

To register another device after you have registered a device, make sure New Device is selected. ([85])

Registering using Open

1Mode ]Open

0000

BS Connect

2Enter a PIN (Personal Identification Number)* code to the unit.

Inputting characters [105]

You can enter any number you like (1-

digit to 16-digit number).

*Some devices have their own PIN code. Enter the specified PIN code to the unit.

3Select Connect.

Open...

4Operate the target Bluetooth device.

Enter the same PIN code (as entered in the above step) on the device to be connected.

Now connection is established and you can use the device through the unit.

The device remains registered even after you disconnect the device. Use Connect (or activate Auto Connect) to connect the same device from next time. ([89])

Searching for available devices

1Mode

]Search

Searching...

The unit searches for available devices and displays the list of them. (If no available device is detected, Device Unfound appears.)

2Select a device you want to connect.

3Enter the specific PIN code of the device to the unit.

Inputting characters [105]

Refer to the instructions supplied with the device to check the PIN code.

Connecting...

4Use the Bluetooth device to connect.

Now connection is established and you can use the device through the unit.

Connecting a special device

1Mode

]Special Device

The unit displays the list of the preset devices.

2Select a device you want to connect.

3Use Open (or Search) to connect.

84

Page 84
Image 84
JVC LVT1774-001A manual Select Connect, Operate the target Bluetooth device, Use the Bluetooth device to connect