Savin 2585, 8502, 10502 manual Default 60 seconds

	Settings You can Change with the User Tools
Menu	Description
System Reset	If no operation is performed for a selected time, the machine
	will automatically return to initially selected display.
	This function is called “System Reset”. You can set the time
	between 10 and 999 seconds.
	Note
	❒ Default: 60 seconds
Energy Saver Timer	The machine enters the Energy Saver mode automatically a
	certain time after your job is finished. You can set the time
	between 1 and 240 minutes.
	Note
	❒ Default: 15 minutes (1 minute steps)
Panel Off Timer	The machine enters to the Panel Off mode automatically af-
	ter your job is finished, after the selected time. You can set
	the time between 10 and 999 seconds.

Note

❒Default: 60 seconds (1 second steps)

	Reference
	See “Auto Off Timer”⇒ P.10 “General Features”.
Auto Off Timer	The machine turns itself off automatically to conserve ener-
	gy a certain time after your job is finished. This function is
	called “Auto Off”. You can set the time between 1 and 240
	minutes.

Important

❒If you use these three functions (Energy Saver Timer, Panel Off Timer and Auto Off Timer), when your copy job ends, the machine will enter the Panel Off mode ac- cording to the Panel Off Timer after the specified time. Next, it will enter the Energy Saver mode according to the Energy Saver Timer after the specified time. Then it will turn itself off automatically according to the Auto Off Timer after the specified time.

Note

❒Default:

•Type1: 90 minutes (1 minute steps)

Type2: 120 minutes (1 minute steps)

❒Auto Off might not be effective when an error message is displayed.

❒To return to the Ready condition from Auto Off, the ma- chine requires the same warm-up time as the time for be- coming ready after its power is turned on.

1

11