Finding more information

You can find information for setting up and using your printer from the following resources, either printed or onscreen.

Quick Install

Provides information on setting up your

Guide

printer, therefore, be sure to follow the

 

instructions in the guide to get the printer

 

ready.

Online User’s

Provides you with step-by-step instructions for

Guide

using your printer’s full features, and contains

 

information for maintaining your printer,

 

troubleshooting, and installing accessories.

 

This user’s guide also contains a Software

 

Section providing you with information on how

 

to print documents with your printer on various

 

operating systems, and how to use the

 

supplied software utilities.

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

You can access the user’s guides in other

 

 

 

 

 

 

 

languages from the Manual folder on the

 

 

 

 

 

 

 

supplied CD-ROM.

 

 

 

 

 

 

 

 

Printer Driver

Provides you with help information on printer

Help

driver properties and instructions for setting up

 

 

 

 

 

 

 

the properties for printing. To access a printer

 

 

 

 

 

 

 

driver help screen, click Help from the printer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

properties dialog box.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting up the hardware

This section shows the steps to set up the hardware which is explained in the Quick Install Guide. Make sure you read Quick Install Guide and complete following steps.

1Select a stable location.

Select a level, stable place with adequate space for air circulation. Allow extra space to open covers and trays.

The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing. See page 1.5 for more information.

1.4 <Introduction>