1.1 INTRODUCTION | 2.1 SAFETY INFORMATION |
This manual has been prepared to provide the information you need to correctly assemble, operate, and maintain this Tiger Striper. Read it carefully and keep it for future reference.
The replacement of any part on this product by other than the manufacturer's authorized replacement part may adversely affect the performance, durability or safety of this product.
USE OF OTHER THAN ORIGINAL SCAG REPLACEMENT PARTS WILL VOID THE WARRANTY.
If additional information or service is needed that is not outlined in this manual, please contact your Scag Power Equipment dealer. Scag dealers are trained in the latest service methods and carry a full line of Scag replacement parts.
When ordering parts, always provide the complete model of this Tiger Striper.
All information provided in this manual is based upon information available at the time of printing. Scag Power Equipment reserves the right to make changes at any time without notice or obligation.
1.2 DIRECTION REFERENCE
The "Right" and "Left", "Front" and "Rear" of the machine are referenced from the normal operating position.
To avoid personal injury, it is imperative that all safety instructions be observed.
1.Read this operator's manual and the operator's manual that is supplied with the machine this attachment is used on.
A replacement manual is available from your authorized Scag Service Dealer or by contacting: Scag Power Equipment, Service Department at P.O. Box 152, Mayville, WI 53050. You may also contact us through our website at www.scag.com. Please indicate the complete model number of your Scag product when ordering a replacement manual.
2.Before removing the Tiger Striper, disengage the mower, stop the engine and wait for all movement to stop.
3.ALWAYS turn the engine OFF, remove the key and wait for all movement to stop before servicing, cleaning or removing the Tiger Striper.
4.Do not modify or alter any component of the Tiger Striper attachment or mower.
5.Do not allow any passengers to ride on the mower.
2.2 OPERATING INSTRUCTIONS
To operate the Tiger Striper, you will need to lower the roller to the operating position. The Tiger Striper can be easily removed or locked in the transport position whenever the machine is being transported or when striping is not needed.
1.To unlock the Tiger Striper from the transport position, lift up slightly on the handle and turn the lock pin until the small roll pin lines up with the slot. See Figure
1
