Scag Power Equipment STT61V-25CH-LP Cutter Deck, Hydraulic System, Weights And Dimensions

Section 3				R
3.4 Cutter Deck
Type	Floating, Adjustable, Anti-Scalping, Hybrid Design Combines Out-Front and Belly-Mount Designs
Construction			Tri-Plate deck construction
	Top of deck consists of three steel plates totaling nearly 1/2" of steel,7-gauge (3/16") deck skirt.
True Cutting Width:
52V				52" (132.0 cm)
61V				61" (155.0 cm)
Cutting Height Adjustment		Foot-Operated Lever Adjustment from Operator's Seat, 1.0" to 6.0" in 1/4"increments
Cutter Blades			.197 Thick, Milled Edge, Wear Resistant Marbain™
52V				Three (3) 18" blades
61V				Three (3) 21" blades
Blade Engagement			Electric Blade Engagement Clutch with Control Panel Switch
			Connected to the Cutter Deck Gearbox through a Drive Shaft.
Discharge Opening		Extra-Wide Discharge Opening with Spring-Loaded Discharge Chute and Turbo Baffle
Discharge Chute			Black, Polypropylene (Plastic), Flexible
Spindles		Heavy-Duty 1-1/8" Top Dimension Spindle Shaft, Cast Housing, Taper Roller Bearing,
		Low Maintenance with Top Access Grease Fitting and Grease Overfill Relief Poppet
Spindle Pulleys			Split Steel with Easily Removed Taper Hubs
Cutter Deck Belts			B-Section with Kevlar Cord, Self-Adjusting, Self-Tightening
Electric Clutch Type			Ogura Heavy Duty PTO Clutch Brake
Drive Shaft			Clamp Yoke Shaft With Two High-Speed U-Joints
3.5 Hydraulic System
Hydraulic Oil Filter			10 Micron Spin-on Element Type
Hydraulic Reservoir				Nylon; 3 Quart Capacity
3.6 Weights And Dimensions			52V	61V
Length			83"	87.5"
Tracking Width			51"	56"
Overall Width w/chute down			64.5"	73.5"
Overall Width w/chute up			53"	62"
Overall Height w/ROPS up			67.5"	67.5"
Overall Height w/ROPS down			56.5"	56.5"
Operating Weight w/ROPS			1325#	1425#
3.7 Productivity			52V	61V
Cutting Width			52"	61"
Acres Per Day			20.2	23.7

The preceding chart will aid you in determining how many acres your Scag mower will cut per day. The chart is an estimate based on 8 hours per day cutting time at 6 MPH with a 20% allowance for overlap and turns.

11