R

Section 6

6.5 BELT ALIGNMENT

Belt alignment is important for proper performance of your Scag mower. If you experience frequent belt wear or breakage, see your authorized Scag service center for belt adjustment.

6.6 CUTTER DECK ADJUSTMENTS

Cutter deck level, pitch and height are set at the factory. However, if these adjustments should ever need to be made, the following procedures will aid in obtaining the proper cutter deck adjustment.

- NOTE -

Before proceeding with the cutter deck adjustments, be sure that all tires are properly inflated.

Cutter Deck Level

The cutter deck should be level from side-to-side for proper cutting performance. To check for level, be sure that the mower is on a flat, level surface, the tires are properly inflated and the cutter deck is set at the most common cutting height that you will use. On the RH side of the machine, check the distance from the bottom of the cutter deck to the floor. Next check the distance from the bottom of the cutter deck to the floor on the LH side of the machine. Both measurements should be the same. If the two measurements are different, the cutter deck level must be adjusted as follows:

1.On the front LH side of the cutter deck locate the cutter deck level adjusting bracket (See Figure 6.5)

ADJUST

HERE

LOOSEN

HERE

Figure 6-5. Cutter Deck Level Adjustment

2.Loosen the two (2) elastic stop nuts. Adjust the bolt up or down on the adjustment bracket to adjust the cutter deck until the distance from the bottom of the cutter deck to the floor is the same as the measurement on the RH side of the machine.

3.Tighten the two elastic stop nuts to secure the cutter deck in the proper position.

Cutter Deck Pitch

The pitch of the cutter deck should be equal between the front and rear of the cutter deck for proper cutting performance. To check for proper deck pitch, be sure that the mower is on a flat, level surface and the tires are properly inflated.

Check the distance from the bottom of the cutter deck to the floor at the rear RH side of the cutter deck directly behind the cutter deck hanging chains. Next check the distance from the bottom of the cutter deck to the floor at the front RH side of the cutter deck directly in front of the cutter deck hanging chains. The measurement at the front of the cutter deck should be equal to the measurement at the rear of the deck. Make these measurements at the LH side of the cutter deck also. If the measurement at the front of the deck is not equal, the cutter deck pitch must

be adjusted as follows:

1.Loosen the jam nut on both adjusting rods. (See Figure 6.6)

JAM NUT

ADJUST HERE

390S0174-1

Figure 6-6. Cutter Deck Level Adjustment

2.Using a wrench on the jam nut (See Figure 6.6) turn the adjusting rods until the proper pitch is obtained on both the RH and the LH side of the cutter deck. Tighten both jam nuts.

26

Page 29 Page 31
Page 30
Image 30
Scag Power Equipment STT52V-25CH-LP, STT61V-25CH-LP operating instructions Cutter Deck Level, Cutter Deck Pitch
Page 29 Page 31

STT61V-25CH-LP, STT52V-25CH-LP specifications

Scag Power Equipment has long been synonymous with durability and performance in the lawn care industry, and their STT52V-25CH-LP and STT61V-25CH-LP mowers exemplify this commitment. Both models are part of the Scag Turf Tiger II series, designed for commercial landscapers and serious homeowners who demand the best in cutting efficiency and reliability.

The STT52V-25CH-LP features a 52-inch cutting deck, while the STT61V-25CH-LP boasts a 61-inch deck, allowing users to choose according to the size of their lawn or landscape maintenance requirements. The decks are constructed from high-strength steel, ensuring longer life and resistance to wear from heavy use. The signature Velocity Plus deck design enhances airflow for superior cutting quality, resulting in cleaner cuts and better grass dispersal.

Powered by a robust 25 HP Kohler Command Pro engine, both models deliver the necessary power to tackle tough mowing jobs with ease. The engine's exceptional torque and performance ensure that even thick grass doesn't slow these machines down. Additionally, the Kohler engine is designed for improved fuel efficiency, helping operators save on fuel costs during long hours of operation.

One of the standout features of the STT52V-25CH-LP and STT61V-25CH-LP is their advanced hydrostatic transmission, providing smooth and responsive speed control. Operators can effortlessly adjust their speed and direction, making it easy to navigate tight spaces and uneven terrain. The ergonomic operator platform enhances comfort, with padded seats and adjustable armrests allowing for extended periods of mowing without fatigue.

Both models come equipped with a heavy-duty, commercial-grade transmission, capable of withstanding the rigors of daily use in demanding conditions. Additionally, they feature an intuitive control panel, allowing users to easily monitor important metrics, such as fuel levels and hour meters.

For added convenience, these mowers incorporate an easy-access maintenance design, allowing for quick inspections and routine servicing. With a focus on user-friendliness, Scag has ensured that operators can maintain their equipment with minimal downtime.

In summary, the STT52V-25CH-LP and STT61V-25CH-LP from Scag Power Equipment offer a compelling combination of power, performance, and user-friendly features. Ideal for commercial landscapers and serious gardening enthusiasts alike, these mowers stand ready to deliver exceptional results in any mowing environment.
Top Page Image Contents