Section 4

4.3INITIAL RUN-IN PROCEDURES (First Day of Use or Approximately 10 Hours)

1.Check all belts for proper alignment and wear at 2, 4 and 8 hours.

2.Change the engine oil and oil filter after the first 8 hours of operation. (See Section 7.4.)

3.Check hydraulic oil level in reservoir. (See Section 7.3)

4.Check for loose hardware. Tighten as needed.

5.Check interlock system for proper operation. (See Section 4.2)

6.Check tire pressure. Adjust pressure if necessary. (See Section 7.10)

4.4 STARTING THE ENGINE

CAUTION:

DO NOT USE STARTING FLUIDS. Use of starting fluids in the air intake system may be potentially explosive or cause a “runaway” engine condition that could result in engine damage and/or personal injury.

1.Be sure the fuel shutoff valve, located behind the operator's seat by the left fuel tank, is completely open. (See Section 7.5)

2.Sit in the operator’s seat, fasten seat belt and place the steering control levers in the neutral position.

3.Engage the parking brake.

4.If the engine is cold, choke the engine as needed.

5.Move the engine throttle control to about half engine speed.

6.Turn the ignition key to the START position and release the key as soon as the engine starts. Do not hold the key in the START position for more than 15 seconds at a time. Allow at least 60 seconds between each cranking attempt to prevent overheating of the starter motor. Prolonged cranking can damage the starter motor and shorten battery life.

7.Allow engine to warm before operating the mower.

4.5 GROUND TRAVEL AND STEERING

-IMPORTANT-

If you are not familiar with the operation of a machine with lever steering and/or hydrostatic transmissions, the steering and ground speed operations should be learned and practiced in an open area, away from buildings, fences, or obstructions. Practice until you are comfortable with the handling of the machine before attempting to mow. Learn the operation on flat ground before operating on slopes.

-IMPORTANT-

Start practicing with a slow engine speed and slow forward travel. Learn to feather the steering controls to obtain a smooth operating action.

Forward Travel

To travel forward with the mower, disengage the parking brake, pull levers inward out of the neutral lock position and slowly push the steering control levers forward an equal distance. The further the steering control levers are pushed forward the greater the forward speed will be. To increase the speed, push the steering control levers further forward and to decrease the speed, pull the steering control levers back.

To stop the forward travel, pull the steering control levers back to the neutral position.

To steer the mower left while traveling forward, pull the left steering lever back. The further the lever is pulled back, the quicker the mower will turn left.

14

Page 17 Page 19
Page 18
Image 18
Scag Power Equipment STWC operating instructions Starting the Engine, Ground Travel and Steering, Forward Travel
Page 17 Page 19

STWC specifications

The Scag Power Equipment STWC, or the Scag Turf Tiger Walk Behind Mower, is a powerful and durable machine designed for the professional landscaper and serious lawn care enthusiast. Known for its robust construction and high-performance capabilities, the STWC provides exceptional cutting efficiency and versatility in various mowing conditions.

One of the standout features of the STWC is its industrial-grade engine options. With choices ranging from EFI to air-cooled variants, users benefit from superior power and fuel efficiency. The mower's engine options ensure that operators can tackle tough mowing tasks with confidence. The STWC is equipped with a high-capacity fuel tank, allowing for extended run times, making it ideal for larger properties or commercial applications.

The STWC features Scag's proprietary Hydro-Gear transmission system, which provides smooth operation and excellent maneuverability. This system allows for precise speed control and helps reduce operator fatigue. Additionally, the mower's heavy-duty steel frame and mower deck contribute to its durability, ensuring it can withstand the rigors of professional use. The cutting deck is available in various sizes, accommodating individual preferences and mowing requirements.

Ergonomic design is a hallmark of the STWC, ensuring comfort during extended hours of operation. The handlebars are adjustable to suit different operator heights, and the soft-touch grips minimize vibration, enhancing user comfort. The mower also features commercial-grade components, including high-performance blades and a high-efficiency air filtration system, which contribute to a cleaner cutting performance.

Another noteworthy characteristic is the mower's versatility. The STWC can be equipped with various accessories and attachments, such as grass catchers, mulch kits, and even spreaders, allowing users to customize their mower for a range of tasks. This adaptability makes it an excellent choice for both residential and commercial landscaping needs.

In terms of maintenance, the STWC is designed for ease, with quick-access components and simple service points. Regular maintenance can be performed conveniently, ensuring the machine remains in peak operating condition.

Overall, the Scag Power Equipment STWC stands out as a high-performance walk-behind mower that combines power, durability, and versatility. Its innovative technologies and thoughtful design make it a preferred choice among professionals who demand reliability and excellent cutting results. Whether for home use or commercial landscaping, the STWC promises a superior mowing experience.
Top Page Image Contents